40 - Reverbs – Stereo 5.1

Stereo input, 5.1 output early reflection spaces and reverbs. All sorts of environments are reproduced here, from booths to rooms, chambers, halls, plates, tunnels, stadiums, churches. A clever set of a few master parameters helps setting different spaces, by remoting a bigger number of parameters you can freely preset. You can select any of these presets in 6 different personally crafted reverbs or variations of the original type. See “Introduction to 5.1 Reverbs” in the Supplementary Material section for more information on these presets.

#4010 2_5.1 Alley Slap E/rEmpty

Stereo audio gets diffused in 5.1 Size pre-sets e/r patterns, diffusion delays and hicuts. Scaler scales diffusion delays. You can change e/r dlys and hicuts values for each Size preset. It will remember your settings. Stereo I/5.1 O

5.1 standard output configuration 1 > LEFT 4 > LFE 2 > RIGHT 5 > Surr LEFT 3 > CENTER 6 > Surr RIGHT

Effect Type

Suggested Use

Max Sample Rate

In/Out

~

~

96kHz

2, 6

#4011 2_5.1 Booth E/r

Stereo audio gets diffused in 5.1 Size pre-sets e/r patterns, diffusion delays and hicuts. Scaler scales diffusion delays. You can change e/r dlys and hicuts values for each Size preset. It will remember your settings. Stereo I/5.1 O

5.1 standard output configuration 1 > LEFT 4 > LFE 2 > RIGHT 5 > Surr LEFT 3 > CENTER 6 > Surr RIGHT

Effect Type

Suggested Use

Max Sample Rate

In/Out

~

~

96kHz

2, 6

#4012 2_5.1 Med Room E/r

Stereo audio gets diffused in 5.1 Size pre-sets e/r patterns, diffusion delays and hicuts. Scaler scales diffusion delays. You can change e/r dlys and hicuts values for each Size preset. It will remember your settings. Stereo I/5.1 O

5.1 standard output configuration 1 > LEFT 4 > LFE 2 > RIGHT 5 > Surr LEFT 3 > CENTER 6 > Surr RIGHT

Effect Type

Suggested Use

Max Sample Rate

In/Out

{O}

[K]

96kHz

2, 6

#4013 2_5.1 Piano Room E/rEmpty

Stereo audio gets diffused in 5.1 Size pre-sets e/r patterns, diffusion delays and hicuts. Scaler scales diffusion delays. You can change e/r dlys and hicuts values for each Size preset. It will remember your settings. Stereo I/5.1 O

5.1 standard output configuration 1 > LEFT 4 > LFE 2 > RIGHT 5 > Surr LEFT 3 > CENTER 6 > Surr RIGHT

Effect Type

Suggested Use

Max Sample Rate

In/Out

{M}

[G]

96kHz

2, 6

#4014 2_5.1 Small Room E/rEmpty

Stereo audio gets diffused in 5.1 Size pre-sets e/r patterns, diffusion delays and hicuts. Scaler scales diffusion delays. You can change e/r dlys and hicuts values for each Size preset. It will remember your settings. Stereo I/5.1 O

5.1 standard output configuration 1 > LEFT 4 > LFE 2 > RIGHT 5 > Surr LEFT 3 > CENTER 6 > Surr RIGHT

Effect Type

Suggested Use

Max Sample Rate

In/Out

{R}

[B]

96kHz

2, 6

#4015 2_5.1 Stadium E/r

Stereo audio gets diffused in 5.1 Size pre-sets e/r patterns, diffusion delays and hicuts. Scaler scales diffusion delays. You can change e/r dlys and hicuts values for each Size preset. It will remember your settings. Stereo I/5.1 O

5.1 standard output configuration 1 > LEFT 4 > LFE 2 > RIGHT 5 > Surr LEFT 3 > CENTER 6 > Surr RIGHT

Effect Type

Suggested Use

Max Sample Rate

In/Out

{D}

[K]

96kHz

2, 6

#4016 2_5.1 Stage E/r

Stereo audio gets diffused in 5.1 Size pre-sets e/r patterns, diffusion delays and hicuts. Scaler scales diffusion delays. You can change e/r dlys and hicuts values for each Size preset. It will remember your settings. Stereo I/5.1 O

5.1 standard output configuration 1 > LEFT 4 > LFE 2 > RIGHT 5 > Surr LEFT 3 > CENTER 6 > Surr RIGHT

Effect Type

Suggested Use

Max Sample Rate

In/Out

{O}

[K]

96kHz

2, 6

#4017 2_5.1 Vox Chmbr E/r

Stereo audio gets diffused in 5.1 Size pre-sets e/r patterns, diffusion delays and hicuts. Scaler scales diffusion delays. You can change e/r dlys and hicuts values for each Size preset. It will remember your settings. Stereo I/5.1 O

5.1 standard output configuration 1 > LEFT 4 > LFE 2 > RIGHT 5 > Surr LEFT 3 > CENTER 6 > Surr RIGHT

Effect Type

Suggested Use

Max Sample Rate

In/Out

{D}

[K]

96kHz

2, 6

#4018 2_5.1 DynamicSpread

Energy below 200 Hz (bass notes and male voices) triggers surround width ambience enhancement from a stereo source. Dsize and Diff can be adjusted to spread the rear channels more. LFE channel is not processed. Stereo I/5.1 O.

Effect Type

Suggested Use

Max Sample Rate

In/Out

{Y}

[G]

96kHz

2, 6

#4019 2_5.1 Spread

Stereo to 5.1 ambience spreader. Dsize and Diff can be adjusted to spread the rear channels more. LFE channel is not processed. Center channel is eq_ed for best imaging. 5.1 I/O

Effect Type

Suggested Use

Max Sample Rate

In/Out

{O}

[K]

96kHz

2, 6

#4030 2_5.1 Ac Gtr Space

E/r dlys attempt to recreate the reflections of walls, floor and ceiling. Size pre-sets e/r patterns, diffusion delays and hicuts. Scaler scales diff delays. You can change all e/r dlys and hicuts values for each Size preset. It will remember your settings. Use sur predly to create spread/distance between front and rear speakers. Stereo I/5.1 O

5.1 standard output configuration 1 > LEFT 4 > LFE 2 > RIGHT 5 > Surr LEFT 3 > CENTER 6 > Surr RIGHT

Effect Type

Suggested Use

Max Sample Rate

In/Out

{D}

[G]

96kHz

2, 6

#4031 2_5.1 Bright Gym

E/r dlys attempt to recreate the reflections of walls, floor and ceiling. Size pre-sets e/r patterns, diffusion delays and hicuts. Scaler scales diff delays. You can change all e/r dlys and hicuts values for each Size preset. It will remember your settings. Use sur predly to create spread/distance between front and rear speakers. Stereo I/5.1 O

5.1 standard output configuration 1 > LEFT 4 > LFE 2 > RIGHT 5 > Surr LEFT 3 > CENTER 6 > Surr RIGHT

Effect Type

Suggested Use

Max Sample Rate

In/Out

{M}

[R]

96kHz

2, 6

#4032 2_5.1 Cathedral

E/r dlys attempt to recreate the reflections of walls, floor and ceiling. Size pre-sets e/r patterns, diffusion delays and hicuts. Scaler scales diff delays. You can change all e/r dlys and hicuts values for each Size preset. It will remember your settings. Use sur predly to create spread/distance between front and rear speakers. Stereo I/5.1 O

5.1 standard output configuration 1 > LEFT 4 > LFE 2 > RIGHT 5 > Surr LEFT 3 > CENTER 6 > Surr RIGHT

Effect Type

Suggested Use

Max Sample Rate

In/Out

{M}

[G]

96kHz

2, 6

#4033 2_5.1 Chamber Choir

E/r dlys attempt to recreate the reflections of walls, floor and ceiling. Size pre-sets e/r patterns, diffusion delays and hicuts. Scaler scales diff delays. You can change all e/r dlys and hicuts values for each Size preset. It will remember your settings. Use sur predly to create spread/distance between front and rear speakers. Stereo I/5.1 O

5.1 standard output configuration 1 > LEFT 4 > LFE 2 > RIGHT 5 > Surr LEFT 3 > CENTER 6 > Surr RIGHT

Effect Type

Suggested Use

Max Sample Rate

In/Out

{D}{M}

[G]

96kHz

2, 6

#4034 2_5.1 Drums Room

E/r dlys attempt to recreate the reflections of walls, floor and ceiling. Size pre-sets e/r patterns, diffusion delays and hicuts. Scaler scales diff delays. You can change all e/r dlys and hicuts values for each Size preset. It will remember your settings. Use sur predly to create spread/distance between front and rear speakers. Stereo I/5.1 O

5.1 standard output configuration 1 > LEFT 4 > LFE 2 > RIGHT 5 > Surr LEFT 3 > CENTER 6 > Surr RIGHT

Effect Type

Suggested Use

Max Sample Rate

In/Out

{D}{M}

[G]

96kHz

2, 6

#4035 2_5.1 Empty Arena

E/r dlys attempt to recreate the reflections of walls, floor and ceiling. Size pre-sets e/r patterns, diffusion delays and hicuts. Scaler scales diff delays. You can change all e/r dlys and hicuts values for each Size preset. It will remember your settings. Use sur predly to create spread/distance between front and rear speakers. Stereo I/5.1 O

5.1 standard output configuration 1 > LEFT 4 > LFE 2 > RIGHT 5 > Surr LEFT 3 > CENTER 6 > Surr RIGHT

Effect Type

Suggested Use

Max Sample Rate

In/Out

{D}{M}

[G]

96kHz

2, 6

#4036 2_5.1 Fat Drums

E/r dlys attempt to recreate the reflections of walls, floor and ceiling. Size pre-sets e/r patterns, diffusion delays and hicuts. Scaler scales diff delays. You can change all e/r dlys and hicuts values for each Size preset. It will remember your settings. Use sur predly to create spread/distance between front and rear speakers. Stereo I/5.1 O

5.1 standard output configuration 1 > LEFT 4 > LFE 2 > RIGHT 5 > Surr LEFT 3 > CENTER 6 > Surr RIGHT

Effect Type

Suggested Use

Max Sample Rate

In/Out

{D}{M}{R}{Z}

[G]

96kHz

2, 6

#4037 2_5.1 Majestic PlateEmpty

E/r dlys attempt to recreate the reflections of walls, floor and ceiling. Size pre-sets e/r patterns, diffusion delays and hicuts. Scaler scales diff delays. You can change all e/r dlys and hicuts values for each Size preset. It will remember your settings. Use sur predly to create spread/distance between front and rear speakers. Stereo I/5.1 O

5.1 standard output configuration 1 > LEFT 4 > LFE 2 > RIGHT 5 > Surr LEFT 3 > CENTER 6 > Surr RIGHT

Effect Type

Suggested Use

Max Sample Rate

In/Out

{D}{M}

[G]

96kHz

2, 6

#4038 2_5.1 Sax Plate

E/r dlys attempt to recreate the reflections of walls, floor and ceiling. Size pre-sets e/r patterns, diffusion delays and hicuts. Scaler scales diff delays. You can change all e/r dlys and hicuts values for each Size preset. It will remember your settings. Use sur predly to create spread/distance between front and rear speakers. Stereo I/5.1 O

5.1 standard output configuration 1 > LEFT 4 > LFE 2 > RIGHT 5 > Surr LEFT 3 > CENTER 6 > Surr RIGHT

Effect Type

Suggested Use

Max Sample Rate

In/Out

{D}{M}

[G]

96kHz

2, 6

#4039 2_5.1 Surr Slap BackEmpty

E/r dlys attempt to recreate the reflections of walls, floor and ceiling. Size pre-sets e/r patterns, diffusion delays and hicuts. Scaler scales diff delays. You can change all e/r dlys and hicuts values for each Size preset. It will remember your settings. Use sur predly to create spread/distance between front and rear speakers. Stereo I/5.1 O

5.1 standard output configuration 1 > LEFT 4 > LFE 2 > RIGHT 5 > Surr LEFT 3 > CENTER 6 > Surr RIGHT

Effect Type

Suggested Use

Max Sample Rate

In/Out

{D}{M}

[G]

96kHz

2, 6

#4040 2_5.1 Tight Booth

E/r dlys attempt to recreate the reflections of walls, floor and ceiling. Size pre-sets e/r patterns, diffusion delays and hicuts. Scaler scales diff delays. You can change all e/r dlys and hicuts values for each Size preset. It will remember your settings. Use sur predly to create spread/distance between front and rear speakers. Stereo I/5.1 O

5.1 standard output configuration 1 > LEFT 4 > LFE 2 > RIGHT 5 > Surr LEFT 3 > CENTER 6 > Surr RIGHT

Effect Type

Suggested Use

Max Sample Rate

In/Out

{N}{M}

[G]

96kHz

2, 6

#4041 2_5.1 Tight Snare

E/r dlys attempt to recreate the reflections of walls, floor and ceiling. Size pre-sets e/r patterns, diffusion delays and hicuts. Scaler scales diff delays. You can change all e/r dlys and hicuts values for each Size preset. It will remember your settings. Use sur predly to create spread/distance between front and rear speakers. Stereo I/5.1 O

5.1 standard output configuration 1 > LEFT 4 > LFE 2 > RIGHT 5 > Surr LEFT 3 > CENTER 6 > Surr RIGHT

Effect Type

Suggested Use

Max Sample Rate

In/Out

{M}

[G]

96kHz

2, 6

#4042 2_5.1 Tunnel

E/r dlys attempt to recreate the reflections of walls, floor and ceiling. Size pre-sets e/r patterns, diffusion delays and hicuts. Scaler scales diff delays. You can change all e/r dlys and hicuts values for each Size preset. It will remember your settings. Use sur predly to create spread/distance between front and rear speakers. Stereo I/5.1 O

5.1 standard output configuration 1 > LEFT 4 > LFE 2 > RIGHT 5 > Surr LEFT 3 > CENTER 6 > Surr RIGHT

Effect Type

Suggested Use

Max Sample Rate

In/Out

{M}{S}

[P]

96kHz

2, 6

#4043 2_5.1 Vocal Hall

E/r dlys attempt to recreate the reflections of walls, floor and ceiling. Size pre-sets e/r patterns, diffusion delays and hicuts. Scaler scales diff delays. You can change all e/r dlys and hicuts values for each Size preset. It will remember your settings. Use sur predly to create spread/distance between front and rear speakers. Stereo I/5.1 O

5.1 standard output configuration 1 > LEFT 4 > LFE 2 > RIGHT 5 > Surr LEFT 3 > CENTER 6 > Surr RIGHT

Effect Type

Suggested Use

Max Sample Rate

In/Out

~

~

96kHz

2, 6

#4044 Surr Black Hole

An abnormally large reverb, sucking everything into a bottomless chamber. Great on sparse playing! Try setting the diffuser to 68 and the size to 91 for a reverse hole. Use this patch on mono sources only. Summed in, 5.1 out.

Effect Type

Suggested Use

Max Sample Rate

In/Out

{R}

[K]

96kHz

2, 6