5.2. Things to Know About Signal Routing

There are a few general “rules” about signal routing in the H9000 which are useful to keep in mind.

  • You can only use one digital audio protocol at any given time. This will be determined in your “Digital Audio Mode” setup.

  • When using S/PDIF over the optical ADAT connectors, you can only work at sample rates of 44.1kHz and 48kHz. Sample rates of 88.2kHz and 96kHz are not supported.

  • FX chains support 32 inputs and 32 outputs. The outputs of an FX chain can be “multed” to an arbitrary number of physical Input/Output channels, computer audio interface channels, etc.