74 - Echoes

Each of these effects has a Mute Inp button to turn off the input suddenly, so you can check the echo decay. You can also use this button to end a sound while adding a smooth ringout. All echoes have selectable right/left/mono input switch and stereo output. Those with additional “Stereo” input selection have true stereo processing. The effects in this bank should in general be used 100 percent “wet”, as they incorporate their own mixing.

#7410 Basic Stereo Echo

Big rich room echo, for use with mono or Use ‘Mute Inp’ button to test echo characteristic. A tunable version of this patch is ‘Big Hall’. Switchable in, stereo out.

Effect Type	Suggested Use	Max Sample Rate	In/Out
{F}{M}	[G]	96kHz	2, 2

#7411 Big Church

Very large room with warm sound. Use ‘Mute Input’ to test or for ringouts. For a tunable version, see ‘Big Hall’. Switchable in, stereo out.

Effect Type	Suggested Use	Max Sample Rate	In/Out
{N}{S}	[F]	96kHz	2, 2

#7412 Classroom

Tight, warm echo with wooden walls and floor. Use ‘Mute Inp’ to test. This is a version of ‘Black Hole’. Switchable in, stereo out.

Effect Type	Suggested Use	Max Sample Rate	In/Out
{F}{S}	[G]	96kHz	2, 2

#7413 Crypt Echo

Deep, long echo for voice or sfx. Use ‘Mute Input’ to test or for ringouts. Based on ‘Boston Chamber’. Switchable in, stereo out.

Effect Type	Suggested Use	Max Sample Rate	In/Out
{F}{S}	[S]	96kHz	2, 2

#7414 Infinite Corridor

Big and bright with medium-long decay. Use ‘Mute Input’ to test or for ringouts. For a tunable version, see ‘Hallway Verb’. Switchable in, stereo out.

Effect Type	Suggested Use	Max Sample Rate	In/Out
{F}{S}	[G]	96kHz	2, 2

#7415 Kitchen Reverb

Tight real room for voice or sfx. Use ‘Mute Input’ to test or for ringouts. For a tunable version, see ‘Medium Booth’. Switchable in, stereo out.

Effect Type	Suggested Use	Max Sample Rate	In/Out
{F}{S}	[G]	96kHz	2, 2

#7416 Plate Reverb

Tight, dense echo good for voice and music. Use ‘Mute Inp’ button to test character and for ringouts. A tunable version is ‘Drew’s Stereo Plate’. Switchable in, stereo out.

Effect Type	Suggested Use	Max Sample Rate	In/Out
{F}	[G]	96kHz	2, 2

#7417 Tape Reverb

Back in the days when a production room meant two tape recorders and a cart machine, we sometimes added echo by mixing the tape output of a deck with its input signal. (Sometimes this was the unintentional effect of a bad power supply filter.) This preset emulates that effect, including the cumulative high-end loss and tape noise, tuned for studio-deck head spacing and with selectable speed. Mono or stereo in, each output is processed separately. Truly retro, man. Switchable in, dual mono out.

Effect Type	Suggested Use	Max Sample Rate	In/Out
{F}	[G]	96kHz	2, 2

#7418 Tile Men’s Room

Tight, dense echo. Use ‘Mute Input’ to test echo. A tunable version of this patch is ‘Empty Swimming Pool’. Switchable in, stereo out.

Effect Type	Suggested Use	Max Sample Rate	In/Out
{F}	[H]	96kHz	2, 2

#7419 Union Station Verb

Big, BIG warm room. (It’s even bigger than its name, but we couldn’t fit Grand Central Station in the display). Summed in, stereo out.

Effect Type	Suggested Use	Max Sample Rate	In/Out
{F}{U}	[F]	96kHz	2, 2