3.3. One Stereo Insert

You can also use a single stereo insert, such as an Eventide PitchFactor.

Stereo Insert

Fig. 3.4 One Stereo Insert

  • Connect your guitar to H90 Input 1.

  • Connect H90 Output 1 to guitar amp 1.

  • Connect H90 Output 2 to guitar amp 2.

  • Connect H90 Output 3 and 4 to PitchFactor Inputs.

  • Connect PitchFactor Outputs to H90 Inputs 3 and 4.

  • Press the Routing Button to select where the Inserts will be in the signal path.

  • Check out Insert Routing (Section 6.2.1) for more info.

Tip

If any of your connected gear operates at line level instead of instrument level, press and hold the Programs and Routing Buttons together to access the System Menu, navigate to the I/O menu, and set the levels appropriately.